Achiever RT-01 U Standard Utility Vehicle

UTV’s Achiever RT-01 Low Ground Pressure 2 ½ Ton Payload Utility Vehicle is designed for stability, simplicity & ease of use for personnel and material transport. It excels in mud and soft ground with its very low ground pressure of 1.0 PSI at no load and 1.62 PSI loaded when 33″ tracks are installed.

This achiever will work in up to 30″ of water. Its high power to weight ratio allows it to easily climb inclines that other machines cannot.

Typical Vehicle weight is 7,500 lbs with an available payload of 5,000 lbs. A 1-man open cab is standard, 1-man, 2-man & 4-man open or closed cabs are available. 28″ D-Dent tracks are standard, 29″ all season high profile rubber tracks are available as are 33″ D-Dent tracks.

A full rear deck and side walls are also available as are rear low flow hydraulics or rear high flow hydraulics giving 45 GPM at 2,700 PSI while the vehicle is stationary. Oil Bath Road Wheel Hubs are available as are optional Ice Claws for rubber tracks.

The Achiever RT-01 U maximum speed is 11 mph. It is transportable on a 4 ton trailer behind a pickup truck. Optional rubber tracks allow unloading on pavement.

This Achiever mounts a Tier 4 / 134 HP Deutz AG electronic engine which combined with the completed unit weight of approximately 7,500 lbs gives a greater power to weight ratio than any other 2 ½ ton tracked utility vehicle. The difference when climbing will be noticeable.

More pictures of the RT-01 U Standard Utility Vehicle

Request a Quote

• Click to see what a New Achiever RT-01 U Standard Utility Vehicle includes

  • Cab: 1-man Open Cab (mechanical suspension seat with 2 point seat belt) Roll over protection structure
  • Lights: Front and rear lights, 1 beacon light
  • Steering: Independent dual joysticks with cable control for each track
  • Engine: Deutz TCD 3.6 L4, 4 cyl, tier 4 turbocharged diesel 134 HP at 2,300 RPM & 369 ft lbs at 1,600 RPM with 120 amp alternator, block heater, glow plugs, secondary fuel filter with water separator, muffler, electric engine shut down system, 2.6 gallon DEF tank
  • Frame: Corten welded tub, corrosion resistant black
  • Power Train: Two speed hydrostatic drive
  • Suspension: Torsion axle
  • Wheels: 2 drive sprockets, 2 solid idler wheels, 8 solid rubber wheels with grease hubs
  • Tracks: 4-ply rubber belts with 28″ D-Dent steel crosslinks
  • Payload: 5,000 lbs
  • Deck Area: (1 or 2-man cab): 60 x 80″    (4-man cab): 48 x 80″
  • Misc: Electric winch socket front & rear
  • Inside rearview mirror, back up alarm and horn, fire extinguisher
  • One set of Operations and Parts and Service Manuals