UTV International Logo
The Utility Expo
Your source of innovative and cost effective solutions in track and truck vehicles
1-800-985-8665

Achiever TC 55 Tracked Aerial

Achiever TC 55 Tracked Aerial


Technical specs : Achiever TC 55 Tracked Aerial
Brochure : Click here
Additional info : Click here

The Achiever TC-55 Optima High Ranger 58 ft Tracked Aerial carrier has been specifically designed to mount this Terex aerial, providing stability, simplicity & ease of use.  The subframe and frame are also designed and built to provide the specific requirements for the performance envelope of the TC-55.

The standard configuration provides a working height of 58 ft (52 ft 8 in to the bottom of the basket).  Side reach is 40 ft.  The platform is side mounted to the end of the boom, supporting a 24” x 48” x 42” two-person platform.  Basket capacity is 700 lbs.  The 24″ pedestal height for tracked vehicle mounting keeps the center of gravity as low as possible.  The standard configuration is equipped with a 1,500 lb jib & winch.

71″ extra-long heavy duty front outriggers 71″ extra-long super duty rear outriggers are standard giving 20″ lift for great stability on hilly terrain and allow deck levelling to within 5 degrees on 12 degree slopes.

Total completed vehicle weight for a typical unit including the boom is approximately 20,600 lbs with ground pressure of approximately 2.83 PSI & stowed height of 119″ allows for transport on a 15 ton trailer.  29″ high profile rubber tracks with heat treated aluminum inserts are standard.  One man open or closed cab is available.  Maximum speed is 8 mph.  Max fording with this unit is up to 36 inches of water.

The Achiever TC-55 Tracked Carrier features a Deutz 134 HP electronic Tier 4 engine which combined with the completed unit weight of approximately 20,600 lbs gives a greater power to weight ratio than other 60 ft tracked aerials.  The difference when climbing hills in your area will be noticeable.  DEF tanks are equipped.

More Pictures for Achiever TC-55 Tracked Aerial

Achiever TC-55 Tracked Aerial with Jib
Achiever TC-55 Tracked Aerial with Jib 119 inch overall height
Achiever TC-55 Tracked Aerial with Jib 20,060 lbs total weight
Achiever TC-55 Tracked Aerial with Jib
Achiever TC-55 Tracked Aerial with Jib 40 ft side reach
Achiever TC-55 Tracked Aerial with Jib 40 ft side reach
Achiever TC-55 Tracked Aerial with Jib 48 inch wide bucket, 700 lbs capacity
Achiever TC-55 Tracked Aerial with Jib 29 inch high profile rubber tracks
Achiever TC-55 Tracked Aerial with Jib transport on a 15 ton trailer
Achiever TC-55 Tracked Aerial with Jib 58 ft bucket reach
Achiever TC-55 Tracked Aerial with Jib
Achiever TC-55 Tracked Aerial with Jib 2,000 lb material handling jib
Achiever TC-55 Tracked Aerial with Jib transport on a 15 ton trailer
↑ Scroll to top

 

 

See it in action

↑ Scroll to top

 

Request a Quote

  • Click to see what a New Achiever TC-55 Tracked Aerial includes

    • Cab:  1-Man Open Cab ROPS Certified to 24,000 lbs
    •   Mechanical suspension seat with 2 point seat belt
    •   Full instrumentation, illuminated panel gauge
    •   Backup alarm and horn, 1 fire extinguisher in cab
    • Lights:   LED high powered lights: 2 front & 1 rear on cab, 1 strobe (top),
    •   rear back up (& working) light
    • Steering:  Dual Joystick cable control
    • Engine:  Deutz TCD 3.6 L4, 4 cyl, tier 4 turbocharged diesel 134 HP at
    •   2,300 RPM & 369 ft lbs at 1,600 RPM with 120 amp alternator,
    •   block heater, glow plugs, secondary fuel filter with water seperator,
    •   2x 1,060 CCA batteries, muffler, electric engine shut down system,
    •   2.6 gallon DEF tank
    • Frame:  Corten welded tub, corrosion resistant black
    • Sub Frame:  All welded steel with 4 radial outriggers, automotive white
    • Power Train: Hydrostatic Two Speed System with oil bath idler hubs
    • Suspension: Torsion axle
    • Wheels:  2 drive sprockets, 2 solid idler wheels, 8 solid rubber wheels
    •   Dust cap retainers (complete set for road wheels)
    • Tracks:  29″ high profile rubber tracks with heat treated aluminum inserts
    • Boom:  Side-mount two-person platform (curb side mount)
    •   24″ x 48″ x 42″ double man fiberglass basket w/steps, 700 lbs max
    •   Safety harness with attached lanyard, 24” x 48” vinyl platform cover
    •   Control-PLUS “3-D” single stick control at platform
    •   Platform rotator with 90 degrees of forward rotation
    •   Category “C” rating per ANSI A92.2
    •   Self locking worm gear rotation drive with a bi-directional motor
    •   Upper and lower boom fiberglass inserts, boom overstow protection
    •   Hydraulic platform tilt at upper and lower controls
    •   Hydraulic lower, mechanical upper platform leveling system
    •   116° degree lower boom articulation
    •   1,500 lbs capacity 8 ft jib & winch
    •   Hydraulic extending jib, 75′ jib load line with swivel hook & latch
    •   Hydraulic dual tools outlet with flow control
    •   Individual lever lower controls, main boom 1,000 lb lifting eye
    •   Front boom support & tie down, bucket support
    •   Bucket access stairs & grab handle
    • Outriggers:  Extra long (71″) heavy duty front outriggers with 18″ x 20″ pads
    •   Extra long (71″) super duty rear outriggers with 10″ x 10″ pads
    •   (allows deck levelling to within 5 degrees on 12 degree slopes)
    • Misc:  2″ square receiver socket, front & rear, front and rear rectangular
    •   ground lugs, removable cab entrance step and 2x side deck ladders
    •   ladders, 2 set of operations and parts and service manuals
↑ Scroll to top

 

 

Keywords for Achiever TC 55 Tracked Aerial : 2-man basket, 2-man bucket, Achiever, Bucket Track, Distribution Construction, Electric Distribution Construction, High Ranger, Hydraulic Rotating Bucket, Line Construction, Line Construction Vehicle, Low Ground Pressure, Material Handler, Material Handling Track, Optima TC-55, Power Line Construction, Powerline Construction, rubber track, Terex, Tracked Aerial, UTV International
 
Copyright © 2024 - UTV International